XTool M822 Programming Adaptor

XTool M822 Programming Adaptor

With the M822 Adapter, you can save as much as 65% of the calculation time on the process, or save you from plugging the key emulator in and out many of times.

Connection Method

Connect VIA OBD:

1. Connect KC100/KC501 to the device via USB and prepare a KS-1
2. Connect the device (or VCI box) with the M822 Adapter using the main cable.
3. Connect the Toyota cable to the car using OBD port.
4. Take the battery clip from the car out and use the battery clip to connect the cable to the battery.
5. Take out the fuse from the fuse box then plug the cable into it.
6. Find the 12V DC male port from the Toyota cable and connect it to the 12V DC female port from the main cable.

NOTE:

For different models, the connection method might not be same. Sometimes an extend cable is needed, and the fuse might be different. Please check XTOOL tablets for detailed wiring diagram when connecting to vehicle and fusebox.

Connect on bench:

1. Connect KC100/KC501 to the device via USB and prepare a KS-1
2. Connect the immobilizer to the Toyota bench cable.
3. Connect the main cable and the Toyota bench cable via M822 adapter.
4. Connect the 12V DC adapter to the main cable.

Suitable for the following vehicles:

Toyota Camry 2014 - 2019

Toyota Corolla 2014 - 2019

Toyota RAV4 2014 - 2019

Toyota Levin 2014 - 2019

Toyota Prado 2014 - 2019

Toyota Land Cruiser 2014 - 2019

Toyota Highlander 2014 - 2019

Toyota Reiz 2014 - 2019

Toyota Sienna 2014 - 2019

Toyota Hiace 2014 - 2019

Toyota Hilux 2014 - 2019

Toyota Crown 2014 - 2019

Toyota Aygo (IMMO Box F3-F4-K6-S6) 2014 - 2019